Type MPU – integrated motor pump unit. A specially designed axial piston pump mounted to a DC or AC motor of IEC frame size 71 or 80. The compact design avoids the need for a bell housing and coupling unit. The pump is available with 2, 3, 4 or 6 cylinders of three sizes, providing flow rates from 0.28 to 1.2 litres/min at 400 bar.

Type M – stainless steel. High pressure pump available with two, three or six axial pistons actuated by a single rotating swash plate. Various combinations of flows and pressures are possible within the 2.0 kw range up to a maximum of 690 bar at 1.15 litres/min for continuous working and up to 850 bar for intermittent usage.

Type M – carbon steel. As above, but in carbon steel.

Type X – stainless steel. High pressure pump available with either three or six axial pistons actuated by a single rotating swash plate. Various combinations of flows and pressures are possible within the 15 kw range up to a maximum of 690 bar at 6.96 litres/min. Special high pressure versions are available for pressures up to 1,000 bar.

Type X – carbon steel. As above, but in carbon steel.

Type XH – stainless steel. High pressure pump incorporating six axial pistons actuated by a single rotating swash plate. Flow and pressure combinations range from 155 bar at 187 litres/min to 636bar at 46 litres/min.